There are often questions asked on the various products offered by Meanwell power supplies. For instance, you are guaranteed that with Mean well distributors power supply you can use a frequency range of 45Hz-440Hz.

There are often questions asked on the various products offered by Meanwell power supplies. For instance, you are guaranteed that with Mean well distributors power supply you can use a frequency range of 45Hz-440Hz. However, the lower the frequency the lower the efficiency that your electrical gadgets will work. For instance, if you are using SP-200-24 at 60 hertz and a current of 230V you will have 84% efficiency. A drop of 50 hertz means that your efficiency goes down to 83%.

If you are making use of Meanwell UK distributors, you may lose power via leakage. Meanwell power supplies, therefore, provides a Y capacitor so that these current can be earthed and neutralized. For instance, a power supply of IEC-60950 needs to operate at below 3.5mA. At this level leakage of current will not hurt the human body if you touch the casing.

Additionally, Meanwell power distributors will make use of two 12 volt power supplies in series in case they do not have 24V and you require this. You can also use the Meanwell UK distributors S-50 model for the purpose of charging You have to, however, ensure that this battery has a power supply that is higher than the voltage supplied by Meanwell power supplies. You can also make use of a blocking diode to protect this power supply. However, you need to control the heating problem of this diode.

When making use of Meanwell power supplies, you may wonder why the fan that controls the heat does not come on initially. This is because it has a pre-heating value that is preset to ensure it begins after the machine has heated up to a certain level. This means that such Meanwell UK distributors products will not turn on the fan up to the start up level that is preset.

There are times when using Mean well power supply that you find it going off automatically. This is over load protection. You need to reduce the output in order to eliminate this problem. This problem also occurs due to over temperature protection. this is when the over temperature pre set value is reached. This means that the S.P.S. reaches protection mode and protects any Meanwell UK distributors product. Once these conditions are back to normal, you are assured that it will switch back on.

In case your Meanwell UK distributors product does turn on well or is making noises, you may have a power surge. If the S.P.S. is connected to high power loads light bulbs or motors. This power surge will cause a failure to start up normally. Any Meanwell UK distributors S.P.S with constant power control. this will prevent any damage that may occur due to an upsurge.

These are some of the few facts that those who make use of Meanwell power supplies should know. It is important to have a power supply company that gives you products that you can use with the power supply they offer. This is because they offer the specifications for these products such as security power supply

Resources:
Diane Baker is the author of this article on Mean well distributors.
Find more information on Meanwell power supplies here


Sponsored Links

Author:

This author has published 1 articles so far. More info about the author is coming soon.