Workshops are locations where folks can certainly spend hours simply constructing wonderful things. With all the current large machinery and sharp items in a workshop, they can also be places where mishaps may happen. If you use a woodworking router, you need to know certain items so that you can keep safe while working with that appliance and its router bits.

Working with your router

Unless you are intimately acquainted with the machine, it is best to spend some time to read your routers basic safety instructions and users manual. Make sure to stick to its directives, or at best the most crucial ones. You might even wish to put a checklist near the equipment to remind you of significant things you must do before, during and after its use.

You should also remember to unplug your router when changing router bits, as these have metal components. Apart from possible electrocution, you may get critically harmed if the equipment somehow triggers while you are trying to remove a bit.

In addition, make sure to never ever start the router if your bits are usually in contact with the wood. When you are ready to work, be certain that the shank of the bit is totally into the collet. Pull out about a sixteenth of the bit. You should steer clear of “bottoming out” the bit or partially inserting it in the collet.

Do not force feed the bit or overload the machine. Utilize a continual speed when feeding so the wood will not likely get burned up. Also, dont face the discharge path of the router even if you are wearing protective equipment.

A bit about router bits

For the bits, never work together with ones that are dull or damaged. Besides impacting on the grade of your work, this can make it harder and in many cases harm your device should a dull bit get stuck in wood. It may even harm you. Be sure youre making use of sharp, top quality router bits.

Make it a habit to see if the bit is safe in the collet. Inspect it routinely for signs of slippage as a result of deterioration. You can never tell what will occur if a bit abruptly slips from its collet while doing a high-speed cut. Also, remember to use a lower RPM as the size of your bit increases.

Remember to keep your router bits clean and oiled. Dont leave them lying around as most of these can easily harm somebody if they fall. Always store them in a box or tray so they dont get harmed or suffer from exposure.

General guidelines to consider

As you are working with wood and heavy equipment, make it a habit to put on eye and ear protection. Keep in mind that you are hollowing out wood with a high-speed cutting tool that is installed on a heavy machine. Eye and ear protection must be enough to help keep the sawdust away and your ears from getting deaf.

Always remember these safety tips when using your woodworking router and its router bits. Many workshop accidents are avoidable, so no matter what you are making, safety should always be a primary consideration.

The author writes reviews of tools online Australia and recommends the best woodworking router.

Author: ClaraBelanger

This author has published 1 articles so far. More info about the author is coming soon.